2024-03-29T15:09:03Z
https://soar-ir.repo.nii.ac.jp/oai
oai:soar-ir.repo.nii.ac.jp:00021693
2022-12-14T04:19:34Z
1221:1222
Fabrication of high thermal conductivity copper/diamond composites by electrodeposition under potentiostatic conditions
Arai, Susumu
Ueda, Miyoka
Copper
Diamond
Composite
Thermal conductivity
Electrodeposition
Galvanostatic condition
Potentiostatic condition
High thermal conductivity Cu/diamond composites were fabricated using an electrodeposition technique. The electrodes were oriented horizontally, and the cathode was located at the bottom of the plating bath. Diamond particles (10-230 mu m) were first precipitated on the cathode substrate, and then copper was electrodeposited on the substrate to fill the gap between the precipitated diamond particles, which resulted in the formation of a Cu/diamond composite. The deposition behavior of the copper was electrochemically investigated, and the current densities of copper deposition under galvanostatic conditions were estimated. The current densities for the substrate with diamond particle layers were 4-10 times higher than the current density for the substrate without diamond particle layers, which led to undesired hydrogen evolution. Cu/diamond composites were formed under potentiostatic conditions without hydrogen evolution, and the resultant composites had compact morphologies. A specimen containing 49 vol% diamond particles with a mean diameter of 230 mu m had the highest thermal conductivity of 600 W m(-1) K-1, which is 1.5 times that of pure copper (ca. 400 W m(-1) K-1). Graphic High thermal conductivity Cu/diamond composites were fabricated by electrodeposition under a potentiostatic condition without the evolution of hydrogen gas.
Article
JOURNAL OF APPLIED ELECTROCHEMISTRY. 50(5):631-638 (2020)
journal article
SPRINGER
2020-05
application/pdf
JOURNAL OF APPLIED ELECTROCHEMISTRY
5
50
631
638
0021-891X
AA00693445
https://soar-ir.repo.nii.ac.jp/record/21693/files/Arai-Ueda2020_Article_FabricationOfHighThermalConduc.pdf
eng
10.1007/s10800-020-01414-3
https://doi.org/10.1007/s10800-020-01414-3
© The Author(s) 2020. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.